Net Time Tracer (LAN Card) V3.0 Recovery Edition combined with Master and Client workstations together:
Master Side includes "Comprehensive management" and "Remote Maintenance" and adds in the most efficiency "Remote Monitoring Tools" functions.
Client Side includes "Recovery protection function", "Net copy function" and supports "Multiple Booting" functions.
Enhanced powerful monitoring system as 5-in-1 card
Each function description is as the following:
Master Workstation Function
Comprehensive management
Integrated management structure
Net Time Tracer (LAN Card) V3.0 Recovery Edition
adopts mode of using Master to manage many of the client. Administrator
can control hundreds of the client on the Master, performing remote
management and system maintenance.
Grouped management capabilities
Master can divide client computers into each unit for different groups (up to 16 groups). Administrator can perform management and maintenance with unit of the groups. Each group can be set consistent maintenance parameters.
Double system verification for extra safety protection
Enter the password for starting up Master workstation is necessary. After accessing, you will need to enter matching codes to connect to client computers. It avoids that somebody will install Master system on their own machine to make some damages.
Remote maintenance function
Remotely changing client's computer name and IP address.
Master can simultaneously change many of client's computer names and IP addresses. All of the involving client computers will have simultaneous changes once an order is given without setting each computer. It is convenient for the administrator.
Remotely changing clients hard disk protection mode
Master can set protection range (C, D, E...) to a single or group of client and the hard disk protection mode (automatic recovery, manual recovery, timing recovery, non-recovery). The setting is fast and unified.
Remotely executing operations of client hard disk recovery and saving
Master can remotely execute hard disk recovery or saving operations to a single or group of clients. When system is damaged or infected by virus, administrator just needs to give a command, and the entire computers will turn back to its normal state.
Remotely controlling client's switching on and off
Master can remotely control turning on and off and restarting client. During course performed in computer room, teacher can simultaneously start up or shut down entire students' computers.
Remotely changing booting up hard disk and Boot Genius parameters
Net Time Tracer (LAN Card) V3.0 Recovery Edition
and Boot Genius are combined closely. It is possible to remotely control
the client to start up different operating systems via Master and modify
relevant parameters (for example, hiding boot up menu and boot up disk
password); it allows you to own a powerful and extra convenient multi-boot
up network management tools.
Remotely configuration of automatic working schedule
Master can pre-define auto-working schedule in a fixed period of time. It arranges works, such as network copying, recovery, saving, switching on and off at the non-busy moment (midnight for example) to execute automatically. Maintenance becomes flexible and efficient.
Remotely synchronizing CMOS and computer time of client workstation
Master can perform synchronization to Client's CMOS parameters and computer time. It helps administrator to uniformly configure and maintain it.
Message sending function
Master can send text messages to specified Client, when administrator is performing maintenance. The way of send to inform users corresponding process is possible.
File transferring function
Master can select files or folders and transfer it to the specified multiple Clients.
Remote remove client side recovery system
If it is necessary to remove client side system, master can remote recovery or restore client side hard disk data together and remove the program. Doesn't need to do system remove manually.
Integrated system setting function
Support administrator to set all kinds of system parameters by integrated interface, such as: normal settings, outlook, sounds setting, log setting, and other setting¡Ketc. Let administrators can have the ideal system settings for their needs.
Client Workstation Function
Recovery protection function
Full range of hard disk protection function, recovery system and data in One second
without fear of Windows operating system damage, hard disk being formatted, system instabilities, and virus infection, you only need to restart the computer, and the system will be instantly restored within one second. It is fast and convenient for resolving your problems.
Selectively configure the partition(s) to be protected
During installation of NetTT LAN 3.0, user can self-define
partition(C: D: ...) to be protected, and decide which
partition is required to be protected according to using
purpose.
Multiple recovery modes to suit varied protection needs
Users can define different protection modes for disks; they are automatic recovery, manual recovery, timing recovery, data saving, and non-recovery for the protection of different situations.
Data saving function
After a period of stable use of your system, you can save your currently updated data into permanent protection area, changing state of this and saving into recovery condition for next use.
Providing suspended protection function for easier program installation
In the mode of suspended protection, users can temporarily release protection for the convenient of software installation and updating, without necessary to save it after updating.
CMOS protection function
Besides protecting hard disk data, system will backup the latest version of CMOS. The backup can be managed by password for preventing from unauthorized modification. And CMOS data can be instantly recovered even it was lost.
Providing various recovery protection functions to meet different demands of use
Administrator can set protected partition (C, D, E...) for each user, with one of protection policies.
Automatic recovery/
every time computer starts up, the protected partition's contents will be recovered automatically and turned into optimized state that system configured. You do not need to worry about system damage or loss of data, the settings will let plant operate computer and keep it in the best state automatically every day.
Timing recovery/
the protected partition will automatically recover its data to originally set condition when turning on computer every few days. This function enables operating staff using this computer in a period to save temporality data to hard disk. Once using period has expired, system would automatically restore and remove all the temporarily saved data.
Non-recovery/
every time computer starts up, system will not perform the restoration automatically, still remaining last saved hard disk condition kept when shutting down. This setting is suitable for general official environment, allowing newly added data to save on the hard disk in a long time.
Manual recovery/
every time computer starts up, user can decide whether to recover to original state or to remain lastly saved hard disk conditions.
Data saving/
if client computer has application or newly added data for permanent saving, it will be able to save current changing condition to permanent protection area. Later the condition can be set as optimized setting state when new system recovery is being performed.
Hard disk usage monitoring setting
Users can set percentage for hard disk usage needs. For example, hard disk will alert when its usage up to 80%, which make users easy to manage.
Prevent I/O HHD
Can prevent some direct damage to the hard disk through I/O (such as low level format), which can avoid some damage to protected data.
Client side use password authorization to operate with higher security
Before operate any function at client side, it is required to enter password to get the authority. This will increase the system security to avoid some people.
Net copy function
With Plug and play function, Network copying function can be performed at once via network.
Target computers only need to insert NetTT LAN 3.0 boot disk
without any operating system all driver, network-copying
operation can be performed immediately and conveniently.
One to more, up to 253 computers can be copied through the network simultaneously.
NetTT LAN 3.0 is able to perform one to more network copying.
At the same time maximum of 253 computers with transferring
speed of 3MB per second are allowed. With this function,
you can rapidly build
new computer systems.
Automatic change of IP address and computer name after network copying is completed
After network copying, Client system will automatically modify IP address and computer name. It will take effect after you restart your computer without setting for each computer manually.
Net copy can be performed without noticing brand or capacity of hard disk
During performing net copy, it is possible to perform with different brand or capacities of hard disk with FAT32 system.
Multiple Booting Function
Net Time Tracer LAN 3.0 provides users with Boot Genius, assisting users
to utilize the space on hard disk. It divides the hard disk
into several multi-use
partitions for booting the disk or data storage. A maximum
number of 90 disks (including 30 disks that may be used as
booting disk) are supported.
Version
Comparison
Comprehensive management
Double system verification for extra safety protection
