 |
Support multiple disk protection modes during installation for different needs. |
| |
- Only System Partition:
Protect first and OS partitions, not others. - All Logical Partitions:
All partitions on the protected disk, it is most suitable for public computers. - Last Logical Partition non protected:
Protect every partition except last one. Good for users have lots of personal data. - Custom setting:
Depends on user needs to choose whichever partitions, but choose none. This is suitable for advanced personal users. |
 |
| |
|
|
-
Full-coverage hard disk recovery and protection. Recover your Hard disk within One second.
|
| |
When users already installed Recovery Genius and used for a while, users want to store the data files during this period and keep it under the Recovery Genius protection. Then, use ¡§Save Data¡¨ to add new data into recover partition to protect. |
 |
| |
|
|
Data save Function |
| |
When users want to keep the current hard disk status without running recovery and restored. Then, select ¡§Data Reserve¡¨. When next time reboot, it will keep the current disk data.
|
 |
| |
|
|
Reserve data Function
|
| |
When users want to keep the current hard disk status without running recovery and restored. Then, select ¡§Data Reserve¡¨. When next time reboot, it will keep the current disk data. |
 |
| |
|
|
You may select any partition(C: D: E:) which you would like to protect, and set up suitable protection strategy: |
| |
- Automatic recovery
Every time computer starts up, the protected partition's contents will be recovered automatically and turned into optimized state that system configured. You do not need to worry about system damage or loss of data, the settings will let plant operate computer and keep it in the best state automatically every day.
- Timing recovery
The protected partition will automatically recover its data to originally set condition when turning on computer every few days.
|  |
- Non-recovery
Every time computer starts up, system will not perform the recovery automatically, still keeping last saved hard disk condition remain the same when shutting down. This setting is suitable for general official environment, allowing newly added data to save on the hard disk in a long time.
- Manual Recovery
Every time computer starts up, user can decide whether to recover to original state or to remain lastly saved hard disk conditions.
- Data Saving
Provide new added data for permanent saving, it will be able to save current changing condition to permanent protection area. Later the condition can be set as optimized setting state when new system recovery is being performed.
|
| |
|
|
Reserved Space Monitoring Function |
| |
Provide Hard Disk usage ratio alarms, real time to monitor Hard Disk have used. |
 |
| |
|
|
Strict access control management |
| |
Provide password protection for set up administrator to prevent unauthorized access. |
| |
|
|
Secure protection of CMOS
|
| |
Recovery Genius v3.55 can protect both the hard disk and the parameters in CMOS. Password control is built-in to prevent others from modifying the data. |
 |
| |
|
|
Prevent abnormal I/O operation |
| |
Enable the Prevent abnormal I/O operation checks box will prevent operations on the hard disk against I/O so as to avoid damage to the protected data. Please note that you should not select this option while Recovery Genius v3.55 is installing OS. |
| |
|
|
After Remove, won ' t Destroy Hard Disk Data |
| |
Recovery Genius V5 has remove function, which can recover back to last saved data or fresh installation hard disk. You do not need to worry about removing to damage hard disk data. |
| |
|
| |
Doucuments
Download |
Version
Comparison
