• Integrated management structure

NetRG 2.1 adopts mode of using Master to manage many of the client. Administrator can control hundreds of the client on the Master, performing remote management and system maintenance.

• Grouped management capabilities

Master can divide client computers into each unit for different groups (up to 16 groups). Administrator can perform management and maintenance with unit of the groups. Each group can be set consistent maintenance parameters.

• Remotely changing client's computer name and IP address.

Master can simultaneously change many of client's computer names and IP addresses. All of the involving client computers will have simultaneous changes once an order is given without setting each computer. It is convenient for the administrator.

• Remotely changing clients hard disk protection mode

Master can set protection range (C, D, E...) to a single or group of client and the hard disk protection mode (automatic recovery, manual recovery, timing recovery, non-recovery). The setting is fast and unified.

• Remotely executing operations of client hard disk recovery and saving

Master can remotely execute hard disk recovery or saving operations to a single or group of clients. When system is damaged or infected by virus, administrator just needs to give a command, and the entire computers will turn back to its normal state.

• Remotely controlling client's switching on and off

Master can remotely control turning on and off and restarting client. During course performed in computer room, teacher can simultaneously start up or shut down entire students' computers

• Remotely changing booting up hard disk and Boot Genius parameters

NetRG 2.1 and Boot Genius are combined closely. It is possible to remotely control the client to start up different operating systems via Master and modify relevant parameters (for example, hiding boot up menu and boot up disk password); it allows you to own a powerful and extra convenient multi-boot up network management tools.

• Remotely configuration of automatic working schedule

Master can pre-define auto-working schedule in a fixed period of time. It arranges works, such as network copying, recovery, saving, switching on and off at the non-busy moment (midnight for example) to execute automatically. Maintenance becomes flexible and efficient.

• Remotely synchronizing CMOS and computer time of client workstation

Master can perform synchronization to Client's CMOS parameters and computer time. It helps administrator to uniformly configure and maintain it.

• Full range of hard disk protection function, recovery system and data in One second

without fear of Windows operating system damage, hard disk being formatted, system instabilities, and virus infection, you only need to restart the computer, and the system will be instantly restored within one second. It is fast and convenient for resolving your problems.

• Selectively configure the partition(s) to be protected

During installation of NetRG2.1, user can self-define partition(C: D: ...) to be protected, and decide which partition is required to be protected according to using purpose.

• Multiple recovery modes to suit varied protection needs
Users can define different protection modes for disks; they are automatic recovery, manual recovery, timing recovery, data saving, and non-recovery for the protection of different situations.

• Data saving function
After a period of stable use of your system, you can save your currently updated data into permanent protection area, changing state of this and saving into recovery condition for next use.

• Providing suspended protection function for easier program installation

In the mode of suspended protection, users can temporarily release protection for the convenient of software installation and updating, without necessary to save it after updating.

• CMOS protection function
Besides protecting hard disk data, system will backup the latest version of CMOS. The backup can be managed by password for preventing from unauthorized modification. And CMOS data can be instantly recovered even it was lost.

• Providing various recovery protection functions to meet different demands of use

Administrator can set protected partition (C, D, E...) for each user, with one of protection policies.

Automatic recovery/

every time computer starts up, the protected partition's contents will be recovered automatically and turned into optimized state that system configured. You do not need to worry about system damage or loss of data, the settings will let plant operate computer and keep it in the best state automatically every day.

Timing recovery/

the protected partition will automatically recover its data to originally set condition when turning on computer every few days. This function enables operating staff using this computer in a period to save temporality data to hard disk. Once using period has expired, system would automatically restore and remove all the temporarily saved data.

Non-recovery/

every time computer starts up, system will not perform the restoration automatically, still remaining last saved hard disk condition kept when shutting down. This setting is suitable for general official environment, allowing newly added data to save on the hard disk in a long time.

Manual recovery/

every time computer starts up, user can decide whether to recover to original state or to remain lastly saved hard disk conditions.

Data saving/

if client computer has application or newly added data for permanent saving, it will be able to save current changing condition to permanent protection area. Later the condition can be set as optimized setting state when new system recovery is being performed.

• Hard disk usage monitoring setting
Users can set percentage for hard disk usage needs. For example, hard disk will alert when its usage up to 80%, which make users easy to manage.

• Prevent I/O HHD

Can prevent some direct damage to the hard disk through I/O (such as low level format), which can avoid some damage to protected data.

• Client side use password authorization to operate with higher security

Before operate any function at client side, it is required to enter password to get the authority. This will increase the system security to avoid some people.

One to more, up to 253 computers can be copied through the network simultaneously.